Vulcan v1.05 - Main Menu

The Menu Structure below must be adhered to at all times during programming or operating of the Vulcan. Regular updates to the structure are available, so please check here prior to operation.

If you require any additional information, or require assistance with any aspect of Vulcan operating protocols, please get in touch.

Vulcan v1.05

Main Menu

MODE: DMX: DMX – 4 channels of DMX data:
·         Channel 1 – Pan 0-255
·         Channel 2 – Tilt 0-255
·         Channel 3 – Focus 0-255
·         Channel 4 – Head Specific – if value set to 170 (or 0xAA in hex) head will move to the park position.
JOG D: Jog D – will jog the head based on the DMX value. Requires 6 channels of DMX data:
·         Channel 1 – value >128 Pan moves +ve direction
·         Channel 2 – value >128 Pan moves -ve direction
·         Channel 3 – value >128 Tilt moves +ve direction
·         Channel 4 – value >128 Tilt moves -ve direction
·         Channel 5 – value >128 Focus moves +ve direction
·         Channel 6 – value >128 Focus moves -ve direction
JOG L: Jog L – will jog the head using the buttons on the keypad.
·         Buttons to the right of the screen move the head up/down (Tilt) and left/right (Pan). 
·         Buttons to the left of the screen will move the focus in and out.
PARK: Park – will move head to park position, pan at mid position and tilt so that the head is level.
HOME; Home – will run through the homing cycle. (Reset)
DMX: TYPE: WIRED: Input is set to Wired DMX via 5 Pin XLR
RADIO: Input is set to CRMX wireless DMX via On-Board Radio Receiver
ADD: 101 Set DMX Address
RADIO: NO LINK: Press Sync on CRMX transmitter to Pair.
LINKED: Unlink Radio? Enter Confirms Unlinking from current Transmitter
UNLOAD: Lamp Removal – Press Enter to Confirm.
The head will tilt so that it is level and the focus mechanism will run the bulb to the back of the head to allow the back to be opened.
Once the bulb has been mounted/removed the bulb will need to rehome itself so press ‘Enter’ to confirm the bulb is able to be moved.
The focus will move to the home position and then the head is ready to move as normal.

If you require assistance or would like to find out more about the MBSi Vulcan Automated PAR 18, please contact us